▲ 8 r/RuggedLaptops+1 crossposts

Just bought a CF-33 - What do I need to know?

I've had a 29 and a 30 a number of years ago. I know they're a totally different form factor and were more modular, etc.

I love tinkering and found what appears to be an MK-1 with a CF-VEK33 for $72 at auction.

I know it will need an SSD and I assume batteries.

My plan is to confirm the model in BIOS and order just a cheap SSD from Amazon. I have an adjustable voltage USB-C trigger cable to power it with for now. Are the aftermarket batteries ok? The unit is surplus from a law enforcement agency so I hope it has onboard WWAN.

I'm gonna make sure and use drivers from Panasonic - can I even download the windows 11 from them, or do I need to start with a clean Microsoft install and then do all the drivers manually, one-by-one?

What else should I check for and do?

reddit.com
u/thereallyredone — 11 days ago
▲ 14 r/stationery+1 crossposts

This paper bleeds through on every other page, same pens, same note-taking session. What gives?

I know it's cheap paper - I scan my notes after my classes are over and recycle the paper - but why is every other page bleeding through all things else being the same. It literally did it to 4 out of the 8 pages of notes I took the other day. I am using fountain pens with Diamine Forever inks. Nib sized EF to M depending on the color. My gel pens do the same, just not to this extreme.

Link to cheap paper: Five Star Filler Paper
I do like the paper though, so far, aside from this. It is reinforced and the holes are triangles, so it flips easily on the rings of the notebook - I have 2-4 subjects in the book at once so there is a lot of flipping around throughout the semester.

All that being said, do y'all have any recommendations for different/better/your favorite 3-hole US Letter size paper?

u/thereallyredone — 1 month ago
▲ 6 r/Lamy

I screwed up, in a bad way - I left my pens sitting with low ink and it dried in them...now I need help

It is **Diamine Forever ink** and all but two I was able to get cleaned out. I may need a couple of new converters, which is no big deal. What upsets me with myself is the two that are completely clogged. A Lamy Safari and an AL Star. I know that removing and re-inserting the feeds in these is very tricky and easy to mess-up/break.

I did some searching and AI suggested soaking in a solution of 10% ammonia, 90% water, and 1 drop of dawn soap.

They have been soaking in just tap water while I am at work (48hr shift). When I get home, if they're still clogged, I guess I'll try the aforementioned solution.

At this point, I may be willing to just buy new halves:
[https://www.thepencompany.com/en-us/product/lamy-safari-nib-unit/12194/\](https://www.thepencompany.com/en-us/product/lamy-safari-nib-unit/12194/)

[https://www.thepencompany.com/en-us/product/lamy-al-star-nib-unit/\](https://www.thepencompany.com/en-us/product/lamy-al-star-nib-unit/)

Anyone know of a place in the US that has the parts for sale? These are coming from the UK.

I certainly learned my lesson - when they get low on ink, refill or wash and prepare for storage.

This whole mess began when the semester ended and we were doing a bunch of travel by plane this summer - I swapped them out for gel pens in my case to fly with. Fall semester started and I went to fill them back up and well...here I am. First world problems, I know.

reddit.com
u/thereallyredone — 2 months ago

Ordered wipers for all 3 vehicles and no magnet!

What the hell?! That's the only reason to order from RA, isn't it? Haha that and the fact that even with shipping, these were almost half the cost as Amazon and I don't even want to think what they'd cost retail.

Carry on.

u/thereallyredone — 2 months ago

Relaxing creased foam in 3-way Briefcase

Ordered a 3-way briefcase directly from MR. LOVE it, but during shipping one side of the laptop padding got creased. No damage, just really annoying.

After completely disassembling a super dirty second hand 2DAP to wash it, I figured the 3-way would be similar. I can see how the middle padding comes out but not the side.

I want to remove the closed cell foam and hit it with a hair dryer or a quick pass from a medium heat iron with parchment paper in between - the heat should relax that crease and she should be good as new. I do not want to try and heat the padding through the bag's nylon and risk causing damage to the bag.

Any guesses? I usually get quick responses here. I may call MR in the AM if no night owls know.

TIA.

reddit.com
u/thereallyredone — 2 months ago

What is this piece called? The other one is gone. Hopefully still available in the US

OK, let's try this again. I was getting errors previously when trying to post.

u/thereallyredone — 2 months ago
▲ 273 r/UtilityPouches+2 crossposts

Finally got my EDC tool kit pretty much complete and setup how I want it, after some trial and error

After trying a few different bags/pouches, I settled on this Amazon special.

https://a.co/d/0anB3pLs

It has plenty of room, the quality is decent, and it is cheap enough that if it wears out soon, I will just buy another. I also finally settled on my contents.

  • Extendable mirror
  • std and metric sockets (free from a cheap kit - the holders are surprisingly good) I put these in because they take up almost no space as well as having a couple of odd sizes that aren't in the klein set)
  • Nebo Mini Larry 500
  • Large rubber band
  • Mini sharpie
  • Ballpoint pen (Uni Power Tank Ballpoint Pen - 0.7 mm - Blue)
  • Knipex twin grip
  • mini flush cutters
  • extendable magnet pickup tool
  • various zip ties
  • straight forceps
  • Vessel driver handle (230W)
  • Milwaukee precision screwdriver (if I had to do it over, I would go with the Klein)
  • small utility knife
  • HF meme kit ratchet, extension, and 1/4" drive bit socket
  • Mini multi meter
  • 6" locking bit extension
  • Klein flip socket set (love these things)
  • #2 phillips bit
  • short bit extension
  • bits from the HF meme kit as well as others I had. I bought the railer holders on amazon
  • 6' tape measure
  • assorted hardware - drywall anchors and wire nuts (I'm thinking about getting an altoids box to put these in
  • velcro cable ties
  • soft jaws for the wrench pliers
  • tweezers
  • mini folding scissors
  • wire stripper/cutters
  • water pump pliers
  • wrench pliers
  • pry bar

So far this has turned out to be a VERY handy kit. I took it to the in-laws earlier this summer and did a whole bunch of honey-do's around their house. I was pleasantly surprised that the water pump pliers and wrench pliers opened big enough to take sink drain plumbing apart. I also used the kit when I replaced my water heater last weekend. I only needed a full size pipe wrench to break 2 pipe connections loose. I also used it to replace a car window motor - only needed 2 deep sockets from my tool box.

All-in-all I am super happy with the setup and would not change much at all. If the water pump and wrench pliers break I will replace with knipex.

u/thereallyredone — 2 months ago

UPS store on the round-about made some changes.....

Charging for USPS package drop-off and they got their parking lot striped. Hopefully the striping makes a difference haha

u/thereallyredone — 2 months ago

Those of you that EDC the 2 Day Assault Pack...

What kind of things/setups do you carry?

I currently EDC a First Tactical Tactix Half-Day Plus Backpack 27L
https://www.firsttactical.com/products/tactix-0-5-day-backpack

I recently got the 2DAP and am trying it for EDC. My deal is I feel like I need pouches for everything with the 2DAP. I love the First Tactical pack because it has so many damn pockets built in. I can easily and very well organize my shit with the pockets and pouches. The 2DAP has so few. I love the way the 2DAP carries/rides though, super comfortable (so is the First Tactical).

I carry basically a mobile office for school and work. Tablet, laptop, associated chargers and electronic accessories, power bank, router and MiFi modem, notebook, pen case, kindle, textbooks, IFAK, flashlight and a few other things.

Do y'all use lots of pouches, or do I just carry a bunch of shit compared to most folk?

reddit.com
u/thereallyredone — 2 months ago
▲ 9 r/MysteryRanch+1 crossposts

Does this look right? I measure right at the max end of the S/M sizing

I have the MAX line still in the pocket. All the videos and such have the yokes way farther down. If I get a L/XL harness, it would stick up the same or farther, right?

[EDIT] This is a 2 Day Assault Pack. I will try adjusting it when loaded as soon as it dries (I disabled and cleaned it tonight - bought used and she was quite dirty. [\EDIT]

u/thereallyredone — 3 months ago
▲ 30 r/MysteryRanch+1 crossposts

NBD - MR 3way broefcase

This is my first MR bag. Recommended by lots of friends. Quality is impressive. I love the expanding section. Padding for technology pocket is dense and covers way more than I was expecting.

Already ordered a 2DAP lol A monster may have just been created. Looking forward to carrying this daily for work and school.

u/thereallyredone — 3 months ago
▲ 3 r/EDCexchange+1 crossposts

[WTS] Maxpedition and Southwire bags

  1. Black Maxpedition Jumbo Versipack with the Janus Extension Pocket. Lightly used from a pet and smoke free home. "A" condition. $125 shipped.

  2. Southwire PROBAGBP, TOOL BACKPACK. New without tags. From a pet and smoke free home. "A" condition. $75 shipped.

Payment via PP G&S

All prices OBO. Not looking for trades.

Verification and additional photos: https://imgur.com/a/fKExQOz

u/thereallyredone — 3 months ago
▲ 736 r/safety+2 crossposts

Cool looking strobe I saw on the life vests on our cruise

I am a firefighter and a safety nerd so I was checking out the life vests in our room and noticed the strobe lights attached. I thought they were pretty cool, and I had not seen one like it before (which doesn't mean much). Anyhow, I thought it would be cool to share.

and yes, I put the light back on the vest after I took the pics. I figured if I wanted one bad enough I could find one online, and I did, they're about $20.

[EDIT]

Wow, lots of people really upset over this LOL. So, emergency equipment should be tested and checked regularly. Just like I check my PPE and air pack every shift, and when I was a driver, I would check every piece of equipment of my truck, every morning. Even when the off-going shift said "everything is good".

This was one of the vests in our state room. I pulled it out to see how it was stored, if the straps were let out, if the buckles were un-done or all clipped together. The light originally was in the pocket upside down and the lens was not lined up with the hole (my pic is the after pic) and the straps were all tangled up with the 2 other vests in the cubby hole where they were stuffed. I agree if the vests are needed, they should be ready to go...which I made sure they were.

Those of you that just bank of the fact that someone else has checked it off are in for a rude awakening. How many times have you seen AEDs in public with expired pads and dead batteries (they can be checked by looking at then through the window, btw), or fire extinguishers with out-of-date tags?

I bet the negative Nancies on here are also the ones that carry tampons in their "IFAK" and have never opened a first aid kit to see what is inside lol

Calm yourselves, enjoy the cool light pics, and carry on with your day, FFS. lol

[/EDIT]

u/thereallyredone — 3 months ago
▲ 4 r/EDCexchange+2 crossposts

[WTS] First Tactical Summit Side Satchel 8L

First Tactical Summit Side Satchel 8L in OD Green. Excellent condition, smoke and pet free home. I love the thing but it is just a little too small for my needs. My loss, your gain. Only used a handful of times.

More info: https://www.firsttactical.com/products/the-summit-side-satchel

Grade A condition

$75 OBO shipped (lower 48), PP G&S.

Timestamps: https://imgur.com/a/iTi09kh

Keywords: messenger bag, tablet, shoulder, laptop

u/thereallyredone — 3 months ago
▲ 8 r/ChrisCraft+3 crossposts

What is this worth?

I am looking for some info about the value of my father-in-law's boat. His health isn't what it used to be and we are looking to help him sell his hand made boat. From what I have been able to tell he used 19' Chris Craft Barrel Back plans and has a V8 in it (Ford 302 I believe).

He milled each piece of wood himself from large planks over the course of 7 years in his back yard. The boat has been sitting, covered, for the last 18-months.

I am trying to get a ballpark idea of what she is worth, as I have found quite varying prices on various boat sale websites.

https://imgur.com/a/IyzlJh2

Thanks in advance.

u/thereallyredone — 4 months ago
▲ 3 r/hardwareswap+1 crossposts

[USA-TX] [H] Surface go (LTE), type cover, case, chargers, screen protectors [W] PayPal, Slim Pen 2

Surface Go (LTE) – 8GB/128GB, Windows 10 Pro.

Red type cover, original charger, higher powered aftermarket charger with longer cord, and USB-C charge cord. One screen protector installed and a second one is included. The case has some wear and scratches on it as it was purchased used. The device is in excellent condition. I was running a cellular card in it with zero issues.

Sell for $250 *OR* will consider trade + money for a Microsoft Slim Pen 2

Timestamp and pics: https://imgur.com/a/Jxh4kS9

u/thereallyredone — 3 months ago

Found a retailer that showed new Surface Go 4 in stock. Now order may get canceled.

I know they've been discontinued, but I did some research and some education models are still in stock.

After I ordered, the website changed to out of stock. So frustrating as I want to stay within the Go ecosystem.

Anyone have any leads on new Surface Go 4s hiding on a shelf in a warehouse somewhere?

Otherwise I guess I'll have to go with a Pro 12" and get all new accessories.

I want a new device, not used...I need good battery life.

Sad face.

reddit.com
u/thereallyredone — 4 months ago

The lack of spacial reasoning in most people infuriates me - especially at the single direction Costco fuel pumps

I always either 1. get behind some idiot who won't drive in the clearly marked center lane to get to the front pump or 2. End up at the front pump and the person behind me needs far less gas than I do (my truck has a 36 gal. tank) and they finish up and then just sit in their car and give me dirty looks.

I do really enjoy it though when I'm next and the front pump opens - and people look at me like I'm the idiot when I pull into the front pump. Especially if the rear pump person is now scenario #2.

That is all. Enjoy your hot dogs.

reddit.com
u/thereallyredone — 5 months ago

Better quality alternative? Battery doesn't want to take a charge...

As the title says. Got this as a secret Santa gift. I absolutely LOVE it, and it's found its way into my cherished and daily used EDC tool pouch. But it won't take a charge anymore.

I need something that is the same size and form factor. I use the front light the most but having the top option is really handy. Must be as bright and have magnets built in. I also need it to be rechargeable, since I always have a charger with me but not always alkaline batteries.

I've looked at the Nebo Slim mini but I think it had way less lumens, but the price is nice. I found this one for a little over $20. I figure if I'm gonna spend that, I may look for a name brand one - which is why I came to the experts.

u/thereallyredone — 5 months ago