So im in the market for a new watch. These are the ones I'm looking at right now and i can't choose which one. Hoping you guys can help me decide. I like them all the same, ive always wanted a skeleton watch but I just can't choose. I dont like the band on the gold and off white skeleton.
Pics should show the whole thing if you click on them.
Is this scaring? It was a light scratch i got while working, scabed over, scab fell off, now it looks like this. Its completely smooth.
Anyone have any info on this toolbox and is it worth $400? I've tried to find info on it on Google but had no luck. Its got the (i think) 1940s-1950s snap on logo so im assuming its pretty old unless its some kind of back to the past edition or something, but it looks really clean.
So i build big rigs for work. On/off road water trucks, flatbed, etc. When i first started i brought in my ryobi fleet from home to temporarily use. Everyone made fun of me "those things wont last a week". Well 1 year later my coworkers have each been through at least 3 milwaukees and im still on my same ryobi set with zero issues lmfao. And my 1/2" impact is only a few 100ftlb less than their milwaukees which is plenty enough for what we need, and my two 2ah high performance batterys last a week, theirs last around a day or two. Ryobi for the win in my opinion.
Hi, ive been ghost hunting for about a year now and i think its time to upgrade from the usual spirit box and emf meter. I just ordered a dead bell, a 4k ir camera with some white and red ir lights, and i think i might order the flux 2 from ghost stop idk yet. I'm going to order a voice recorder, i thought about getting a music box or a rem pod but wouldn't they basically be the same as the dead bell and flux 2 being all emf? Anyways anything else i should add?
So i just installed a meanwell 600w power supply on my 5 plus and now its deciding not to print. Everything runs fine, all the wires are in the right place. It does its pre print homing, heats up, then it just sits there and the progress bar slowly goes up but its not doing anything. Ive tried re slicing multiple times and a different sd card to no avail, not even old prints work.
I'm looking for a nice 3d printer with a large build volume, multicolor printing, and preferable high temp to print cf, any recommendations? I have a budget of 3k, maybe 4k for the right printer. Im also on the hunt for a filament maker, I dont want to spend 10-15k on one but I would pay around 5k for one. I seen creality is coming out with one but the amount of compatable filaments seem limited, i haven't looked into it too much though.
Hi elegoorus (sorry i had to say that for some reason lol), ive been thinking about buying an orange storm giga. Are they worth it? I was looking into them a while back after they first came out and a lot of videos i watched they either had troubles getting them to print or had troubles even getting them to turn on/work. If its not worth it, are there any other recommendations you guys have? I'm looking for a very large build volume, preferably multicolor/able to add multicolor, and the ability to print Cf would be awesome.
Looking for a good dual 5015 adapter for my 5 plus, anyone have any recommendations? I have the microswiss direct driver extruder. Also on the hunt for some cable chains, I have one for the extruder but I want some for the bed and the motors. I havent figured out how to use cad yet or I would build my own.
Just installed the meanwell LRS-350-24 24V/14.6A/350w power supply into my ender 5 plus. Now all of a sudden it runs fine until I go to print then it heats for a moment and starts homing then it shuts off and turns back on. Its set to 115v, all the wires are in the right spot, any ideas?
So bought this 5 plus for $60 and was having a ton of issues with it. It wouldn't finish prints, print quality was horrible, nozzles kept clogging, kept getting shocked by it, it didn't have a build plate but thats not a big deal. Anyways so I put new ground wires on it, added the micro swiss direct drive extruder and put a pancake motor on it so it wasnt carrying the weight of the bulky factory one, all metal hotend, bought a ton of steel nozzles, bought a build plate, new Capricorn bowden, new fans except the parts cooler and power supply, and reinstalled the software and installed the adjustments for the new extruder. Now it prints great, finishes its prints, no more electrocution, etc. However on the first larger size print im doing right now this line showed up. I have no idea how to fix it and ive tried looking it up but found no answers yet. So any help on that would be great, im gonna try a smaller print to see if it still shows up but I did some small prints and it wasn't on them.
​
Also while I'm here, ive done all the above and I plan on adding a raspberry pi, a new power supply, some leds so I can see, add a mod to lift the front frame rail up, anything else I should add/do?
Also i added those winsinn fans I kept hearing about and it sounds like I installed a jet engine, not even joking. The original one broke, while I was removing it one of the wires snapped off, so I can't put it back on. Any fan recommendations would be awesome. These are much more powerful but super loud so I'd like to keep the power but remove the sound lol.
Every time my elbow bumps the frame or guide rods I get a nice shock. Ive opened the bottom and checked for any loose wires/ground and nothing. Im assuming its from the bowden tube building static from it and the filament rubbing but I wanted to see if anyone else has had this issue.
Anyone had an E-delivery not show up? I ordered xbox gamepass and it hasnt shown up. I've checked everything in my email spam, trash, etc. and my walmart account and it definitely wasn't delivered. And its the right email, ive triple checked and I recieved emails afterwards for my pickup order and a shipped item. Its non returnable or refundable and the support chat is useless. Anyone have this issue and have any ideas how to handle this or did i just lose $20?
So im looking to build a decent surround sound system under $1000-1500. Would the klipsch reference premiere rp502s be good for my corner speakers? Then I have the rw 34c for my center speaker, and the onkyo tx rz70 for my reciever. Now im on a hunt for 4 down firing speakers. Would all of that be enough? I dont need anything fancy, its going in my bedroom.
Anyone near Atoona PA? I want to join a team, ive gone by myself for the past year but its hard having to do everything yourself. It would be nice to have someone so I could have so much equipment and they could have the other. Plus im at the point ive had too many experiences that have pushed me to my limit that I need someone to be there with me. I mean obviously I still go lol, but i think its getting worse being that over time ive become more scared of evil spirits that they can sense my fear more if that makes sense. When I first started I walked through a place and the catacombs that's incomprehensibly haunted and pitch black perfectly fine. Now it seems like every time I go somewhere I have extreme anxiety and i can't do the exploring I want to or go to where I can feel the most happens. Which I can feel put the most haunted places if that makes sense, im not medium or anything, I consider it luck so far until further proven.
Guy at the vape shop gave these to me. Anyone tried amanita muscaria or these gummys? Is it worth trying and how are the effects?
I know this isn't weed so hopefully it's ok to post. The guy at my local vape shop gave these amanita mushroom gummys to try, are they safe and how are the effects if anyone's heard of them?
Ive been collecting records for over 7 years now, started when I was 14 when I bought one of those cheap rca suitcase record players and a few records. Next thing I know everyone is giving me records for gifts or they give me their collections because they dont want them. I have over 1000 records now. Thank god that cheap record player didn't last long because I heard they're bad for your records, it died a few years ago and I never got around to buying a good setup until now.
I have no idea what im doing though, I know you need a preamp and an amplifier between the speakers and turntable. Right now im looking at the Fluance RT85 turntable, Uturn audio Pluto 2 phono preamp, Fosi audio ZA3 amplifier, and JBL 308P MkII speakers. I dont know if any of that will work together or are good brands.