always liked Holosun's dots
the white dots were painted by me. They come with two black dots there, I just used a white paint pen and filled them in for some "backup" sights
Recently picked up this 2K11 Pro and have been lovin it
Thought it'd be a heavy carry, but it's actually not too bad
Have a streamlight tlr-7 hl-x, Holosun 407C X3, and a DuraMag 20 round mag
I have a 2K11 pro and a new holosun 407
I want to cowitness as I want to cowitness so I was looking at some of the Dawson plates. I know it requires the higher front sight
When it comes to replacing that front sight, how easy is it? Im barely competent when it comes to tools and it says it comes with included tools.
That or any other ideas that y’all may have, ty!
just picked up my first AK, this WASR 10 underfold
i'm a brown man, so the first rifle i ever shot was actually my dad's ak, so it's only right that I grab one of my own
anything i should be aware of/resources y'all recommend?
excited to put rounds down range, also have an odd urge to buy a matching tracksuit and smoke a cig
Was wondering if anyone has asked/seen how long the website’s gonna be down for service
forgive me if this is asked a lot, or is more common sense then it seems
I just got a solgw exo3 pin and weld that comes with a ASR flash hider (see pic, I'm pretty sure its the Closed Tine one).
Im lookin at the OCL 556k. So correct me if I'm wrong, would I buy a ASR bravo mount, attach it to the can, and now the can's ready to use? I just have direct thread for my 9mm cans, so it's a little new to me.
Appreciate advice on any other compatible mounts as well, ty
lookin to get a 13.7 JAKL (the one above specifically) Was just wondering how people's experience have been owning it. Also what suppressors you guys run on it and such
I know it's asked everyone now and then, but it's been a minute since someone's asked about the 13.7, and I think they've fixed some stuff over that time as well
Thank you!
To those who have sent their 2k11's in to have the trigger rattle fix, about how long did it take from shipment to get back to ya. Plan on sending her in tomorrow
I'm gonna be busy the next few days anyways, was just curious so i can try and plan some rangetime
This may or not be asked alot, but I just was wondering what the aftermarket there is for the 9mm DS Warrior
I know it just came out, so there prob isn't much to begin with. But I am new to 1911/2011 so didn't know if barrels/slides and such were swappable or anything
I'd like a new slide look and prob adding a bushing comp (yeah I know they dont do much, cool looking > function ya know)
Was wondering what others have done/pics appreciated
Thank you!
Here's my 100% 1 of 1 G43x that absolutely no one else has done before. (insert buzz lightyear meme)
In all honesty, originally hated the small subcompact bc my hands/fingers were a lil long plus how snappy they tend to be. Obviously changed my mind with this one
Build list:
-Holosun EPS carry
-Radian Afterburner and Ramjet
-Radian Anchor Magwell
-Streamlight TLR-7X Sub GL with some electrical tape for a cleaner look
-Talon Grips (slightly trimmed bc of the magwell, put the extra pieces in front of takedown lever on other side and under beaver tail)
-Harder to see, but wrapped the lower portion of the grip with some self-stick athletic tape for added some added width feel
I know, I know this is prob asked a lot, but I'm neurotic so, ya know
I just started intern year and sorta still getting my bearings still. I'm FM and my first rotation coming up is ICU. Problem for me is that I never did an ICU rotation in med school, so things like pressors, vents, vent settings are all hieroglyphics for me tbh. It doesn't help that my hospital is also a huge academic/research place too, so there's some really sick/complex patients everywhere.
I have like a week still before I start on a Saturday, so have some time to prep. I was wondering what advice you guys have. Especially resources you recommend (particularly vent shit if u got one)
ok thx love u
I recently just grabbed a 9mm DS Warrior and was looking for magazines. I love a chunky baseplate and the OEM 20 round leaves a bit to be desired with the visible steel.
I was wondering if anyone has tried the 20 rd magazine Prodigy/Duramag and how they like it
That or any other options y'all recommend
Was given some gift cards to PSA and grabbed a GF3. Excited to enter the platform and see where I go. Any tips/advice, ty!! (Yeh I was influenced by BF6)
Attachments below if u wanted to know:
- Magpul Zhukov stock with .25 cheek riser and MOE SL® Enhanced Rubber Butt-Pad
-RS Regulate mounts
-Primary Arms CLx 3X Prism
-BCM® Vertical Grip Mod 3
-streamlight protac on a midwest industries laser light mount
-NC Star cleaning rod (a little long hehe)
was in the market for a new rifle, had some gift cards, so said screw it and got a GF3 (I know, I know). Honestly was influenced because it's fun in BF6 (yes I know the one pictured is 74). If I get into the platform more, I'll prob look at getting an import. Technically MY first AK, but was introduced to the platform by my dad's Inter Ordinance AK from the mid 2010s
Attachments if you wanted to know for whatever:
- Magpul Zhukov stock with .25 cheek riser and MOE SL® Enhanced Rubber Butt-Pad
-RS Regulate mounts
-Primary Arms CLx 3X Prism
-BCM® Vertical Grip Mod 3
-streamlight protac on a midwest industries laser light mount
-NC Star cleaning rod (a little long hehe)
my lgs has a pretty nice deal for some bulk PMC Bronze 7.62 x 39
Was wondering if anyone has ran this and how it's performed for them
only thing i've seen in regards to reviews are just ones on ammo seller pages, that or im fucking blind
thank u
I know it’s prob asked every now and then
I was just wondering how long it took for you to get issued your CCW to actually getting the card. I know it can technically take up to 90 days.
My card got issued July 1st and I’m just waiting
Only reason I’m being impatient is bc my firearm got to my FFL today and I’m itching to pick it up lol
Hey guys, I’m looking at getting a 10.5 300 BLK and I came upon this one:
Was wondering if anyone has any experience with this, thank you!
I tried searching the subreddit, but the mobile version isn’t letting me for some reason shrug
hey guys i've been looking at my next firearm and had my interested peaked by 300 BLK.
I currently have a 9mm PCC as my home defense, but want something that's "a step above" I guess and can do a little bit more. (distance, stopping power). I know average cost per round is more than 5.56, but that's fine with me and am interested in a 10 inch barrel.
I did some research, but figured I'd ask ppl who use it day to day with my specific situation
I had my eye on this one https://palmettostatearmory.com/psa-sabre-forged-10-5-300-bo-with-10-qd-rail-pistol-w-sba-3-brace-and-sabre-grip.html
I do plan on eventually getting a suppressor, but still want to use the firearm in the meantime. Is a 10.5 unsuppressed 300 blk crazy loud like a similar barrel 5.56? I mainly use indoor ranges as I live in the city. just want to be courteous to others and me too lol
I've heard flow-through suppressors can cause cycling issues, so which suppressors do y'all use/resource you can direct me to
any other advice/important things to know. Thank you!
Background: Med school grad about to start residency with 200K loans, most likely considering RAP and then evaluating at end of residency.
Explain to me like I'm not a doctor, I would apply for RAP through the StudentAid website once it becomes available July 1st? As of right now I just chill and wait for that?
Thank you! I promise I am competent medically, finances just break my brain
hey guys,
one of my buddies recently gave me two gift cards to PSA because he heard I was in the market for my first AR. With those cards plus my budget, I am looking at one of the 16 inch CL Sabre AR15s.
My plans with the rifle: I don't plan on kicking doors in or clearing rooms, just casual range days, with some larping/training lol. Plan on suppressing it somewhere down the line.
I am still new to this so was just wondering on tips/advice/options y'all had! Plus having access to their warranty is such a nice plus
Thanks!