Pulse-Eight Pro Audio1632 not working with Navigator EQ

I can control the EQ in the driver itself but I really want to expose it to the client. I have the "show EQ in navigator" tickbox checked for each room connected to the matrix. Is there something I'm missing? Firmware on the Pulse-Eight is 3.01 the driver version is the most recent (I think 3.03) and we're running Director 3.4.3.

Any help with this would be appreciated, even if it's just telling me "nope, that don't work"

reddit.com
u/smeeon — 3 days ago

I was drilling into an iron doorway above my head and the iron filings left rust streaks down my arms once I started sweating

u/smeeon — 17 days ago

Surprised this orientation worked

Support popped off in one piece too. Very impressed. Didn’t expect alphabet soup PETG to perform this well.

u/smeeon — 17 days ago

Client attempted to pull their own HDMI by taping a new one to the old one

This getting stuck under the house is how we got the job.

u/smeeon — 24 days ago

Really should have gotten into shades years ago

Motorized shades are a lot of prep work but the money is good, installation isn’t without it’s own specific pitfalls but I’m enjoying them so far.

u/smeeon — 1 month ago
▲ 772 r/lotr

The LOTR 2001 collectible glasses have been the most durable quality glasses in our household used constantly for the past 25 years.

The little LED lights are gone, but the glasses survived.

u/smeeon — 1 month ago

half of the 180 cam is fogged 1 week old

we've had a ton of rain recently, but this doesn't seem great.

u/smeeon — 1 month ago

Need some advice to get these James Q48s sounding better

We have these two James Quartz series Q48s powered by two McIntosh MC501s. The high speakers are tied to the 4ohm output of the McIntosh and the woofers are connected to the 2ohm outputs. Balanced XLR to a Yamaha CX-A5200 preamp. There’s also a center and surrounds but one problem at a time.

When listening to just stereo audio, it sounds less than stellar, we’ve done room calibration with the mic and manually. It’s a bit muffled, there’s just not a lot of clarity, like the upper midrange is dull.

Thoughts on improving this setup?

u/smeeon — 1 month ago

There's a kind of real time Wienermobile tracker and you can request it to come to your event for free but there's a huge wait list

u/smeeon — 2 months ago

New supplier? I think I'm going to order some and check their consistency

Bit expensive, but if they meet the quality control threshold of ZenMagnets they could be a good, albeit expensive alternative.

u/smeeon — 2 months ago

Inexplicably smells like sulfur

Should have named her Luci.

She came in from outside with a *strong* scent of sulfur on her. I don’t even know where she would have been to pick that up unless she’s sleeping in a neighbor’s gardening shed

u/smeeon — 2 months ago

At least the small ones have a flared base.

Got me a set of the new conduit fish tape pullers from dewalt. They are as lewd in person as they looked on the box. For those that don’t know, these create an air-tight seal for your shop vac against the conduit for pulling string through.

u/smeeon — 2 months ago

Pics from the Nerd Rummage Sale

414 Stevens Ave NE in 5 points. The cheap burger deal is worth the drive! Still going for a few more hours ❤️ support your local non-profit makerspace!

u/smeeon — 2 months ago

The Nerd Rummage Sale is tomorrow at Makers Local 256 go by and support your local non-profit makerspace!

u/smeeon — 2 months ago

Not as fun as I had hoped. The magnetic field is pretty decent but the wild variation of sizes makes it difficult to produce any strong shapes. The donut in the second image is the strongest shape I could make using all 24.

u/smeeon — 3 months ago