u/Jaylin_K

I have a ds lite

and the top screen has had dead pixel for years, i have gained experience in repairing stuff in the past couple of years and would like to repair it.

The problem is i have no knowledge on ds repair so i wand to know if i need a specific type of screen? the model is usg 001.

Since i am mostly doing this for the experience i wouldn't mid a lower quality screen.

Any screen recommendation and tips/advice would be high;y appreciated.

thx for reading and have a nice day.

https://preview.redd.it/72nexquvs26h1.jpg?width=4624&format=pjpg&auto=webp&s=1aaf3e7d5f0bd4207487d1b4522b3ef63af54315

https://preview.redd.it/svhivquvs26h1.jpg?width=3468&format=pjpg&auto=webp&s=05ba6a306b4416d5afa6baeb42d97a8a49ad9b2d

https://preview.redd.it/ljisxquvs26h1.jpg?width=4624&format=pjpg&auto=webp&s=242015edea6b9b565fa6e304e73454d7199d1bae

I have a ds lite

and the top screen has had dead pixel for years, i have gained experience in repairing stuff in the past couple of years and would like to repair it.

The problem is i have no knowledge on ds repair so i wand to know if i need a specific type of screen? the model is usg 001.

Since i am mostly doing this for the experience i wouldn't mid a lower quality screen.

Any screen recommendation and tips/advice would be high;y appreciated.

thx for reading and have a nice day.

https://preview.redd.it/1zr5x8p3p26h1.jpg?width=3468&format=pjpg&auto=webp&s=4fd41b0d7b2be0bb6ae5c7d702877863e7d8da81

https://preview.redd.it/40qjw9p3p26h1.jpg?width=4624&format=pjpg&auto=webp&s=1fe78f0817c806699174bbe7cc574dc8bd589ce6

https://preview.redd.it/fq1lq9p3p26h1.jpg?width=4624&format=pjpg&auto=webp&s=a40480374ccbe645ae5466f8c3fd2f1626dd22ed

Hi i have a jdm-011 controller and most of the parts for it.

What i need are:

The midframe

Speaker

the button for the touch pad (button 17 out of mine head).

Springs for L/R2

--

First off the mid-frame.

I don't have it anymore, first question tho on mine other controller the l1 and r1 are attached to the mid frame i do have those buttons but i don't have the frame do i need anything special like how l/r 2 needs the springs?

second question when looking for parts on Allie express, its hard to find for the jdm-011 frame and sometimes it says in the picture its jdm-011 and on the version picker it says (and vice versa) for version 1000 1100 or 010 are these interchangeable? and what would be best to get?

Also there is a jds version on some listings what whit this is it cross compatible?

--

As for the speaker there seem to be 2 different version's a bigger and a smaller one witch one do i need for this controller revision (will put some pictures with the post)

--

Touch pad button

For this one i think i found a good replacement just wanted to double check if its oke and maybe would like some good search term to use for replacement so i cloud maybe find a cheaper replacement. (ill add a pic to post)

--

Well the Springs seem officious so i think i should be fine

https://www.reddit.com/r/PS4Pro/comments/1svc862/ps4questions_about_controller_repairribon_cales/ (this post contains some more foto's)

https://preview.redd.it/7dycekl34w5h1.png?width=273&format=png&auto=webp&s=3f28abcd163dff24ddaaf3b34a51debfe711e696

https://preview.redd.it/bjkcejdx3w5h1.png?width=362&format=png&auto=webp&s=ba52edb775e9175725f6d31a3254d8c90218d14c

https://preview.redd.it/jira1wb05w5h1.png?width=401&format=png&auto=webp&s=2cc9c75057c843bdfaed157ab658d6f6135ceff8

Hi i have a jdm-011 controller and most of the parts for it.

What i need are:

The midframe

Speaker

the button for the touch pad (button 17 out of mine head).

Springs for L/R2

--

First off the mid-frame.

I don't have it anymore, first question tho on mine other controller the l1 and r1 are attached to the mid frame i do have those buttons but i don't have the frame do i need anything special like how l/r 2 needs the springs?

second question when looking for parts on Allie express, its hard to find for the jdm-011 frame and sometimes it says in the picture its jdm-011 and on the version picker it says (and vice versa) for version 1000 1100 or 010 are these interchangeable? and what would be best to get?

Also there is a jds version on some listings what whit this is it cross compatible?

--

As for the speaker there seem to be 2 different version's a bigger and a smaller one witch one do i need for this controller revision (will put some pictures with the post)

--

Touch pad button

For this one i think i found a good replacement just wanted to double check if its oke and maybe would like some good search term to use for replacement so i cloud maybe find a cheaper replacement. (ill add a pic to post)

--

Well the Springs seem officious so i think i should be fine

https://preview.redd.it/1yednllv3w5h1.png?width=401&format=png&auto=webp&s=6720fca364ec56f263af370f495cde8659fac2c1

https://preview.redd.it/bjkcejdx3w5h1.png?width=362&format=png&auto=webp&s=ba52edb775e9175725f6d31a3254d8c90218d14c

https://preview.redd.it/7dycekl34w5h1.png?width=273&format=png&auto=webp&s=3f28abcd163dff24ddaaf3b34a51debfe711e696

https://www.reddit.com/r/PS4Pro/comments/1svc862/ps4questions_about_controller_repairribon_cales/ (this post contains some more foto's)

Hi i have a pc with a i7 3770 14 gb ram 1600 mt form 3 different sticks (i know thats not good) a asus p8h77-m pro motherboard and a rx 6500 xt gpu.

I have heard mixed tings about drivers for setup like this, i have heard you should install old windows 10 drivers, or only install stuff that windows update finds for you.

What is the best way to go here i have tried tiny 11 on this pc while have install all the old drivers and i think id made the pc less snappy, today i reinstall it without installing old drivers and it feels slightly better.

Btw this pc gets used at mine work bench to look stuff up or test controller's and assist in repairs and that's it outside off letting mine friends play minecraft on it some times witch runs good.

So what setup is the best? install old drivers or just let it be? (i am ganna be building with some more older parts so that's why i ask)

So a friend of mine has a gamecube that doesn't read disc's

From mine research

you can try cleaning the lens

You can adjust a variable resistor (and you should measure before and after)

Capacitor replacement i don't know much about this one. Do i need different caps for dol001 and dol101, What are de specification of the caps i need?

And replacing the laser. I struggle to find out about this one, do dol101 and 001 need different ones. Witch laser do i need? are there different lasers? How to make sure you get a good quality one?

if i am missing anything pls inform me

thx for reading and have a nice day.

Hello, i have a power mac g5 and i wand to convert it build a normal pc in it.

After some research i found out about the laser hive kits.

Now i am considering the ATX Low 120 Kit or the G5 Full ATX conversion kit with integrated PSU mount.

Now i have some questions about these. For the ATX Low 120 kit, i think i like this one the most since it preserves the disc drive and hard drive bay, ting is i can't seem to find anything out about how to mouth a psu in the case so how would i do this? The listing also mention's the option of having a hole for power socket or having no hole for the socket, there or no images that make clear what the difference between these, wich one schould i pick

For the G5 Full ATX conversion kit with integrated PSU mount, is says on the listing it removes the 3,5 inch drive bay. How would i go about reading a place for 3,5 ich hhd bays?

And some question's that is for both how would i connect the original dvd drive since it doesn't seem to be sata, and how can i open a dvd drive form software since the dvd drive is hidden, and do i need to do anyting special to make the door that hides the dvd drive to open or does it open by the force of the dvd dirve tray. also for mounting fans up front do i need to buy fan radiator brackets(for the front fans) separately or do they come included?

Also witch kit would you guys recomend

Links:

https://thelaserhive.com/product/atx-low-120-kit/

https://thelaserhive.com/product/g5-atx-kit-psu-holder/

https://thelaserhive.com/product/fanradiator-brackets/

I host lan partys once in a while and me and m8ne friends some times play mc.

Ting is i got 2 xbox 360's so there is split screen. The ui for inventory is smal and hard to read is there any way to make this bether?

I have this ps4 controller i wand to repair but i have some questions.

The button for the touch pad is broken what is then replacement part called and do i have to account for different versions and any tips for soldering this on without destroying it?

The mid frame or what its called (it also hold the flex ribon ting that detects button presses) What diffrent fersions are there and wich one i need?

And as last the ribon cable that from between the mainboard and the dautherboard thaqt houses the micro usb conection. I tink there are diffrent versions but i dont know wich one i need i burnt it by useing it on a diffrent ds4 so wich one do i need?

I would like to thank you for reading an i wish you a nice day

Also i tink this might be a thrith party controller.

https://preview.redd.it/nnxgvrr29cxg1.jpg?width=2048&format=pjpg&auto=webp&s=4c3fbba396dfd16b3725c42cf569b091a71134e8

https://preview.redd.it/xuen4sr29cxg1.jpg?width=2048&format=pjpg&auto=webp&s=11a43ae88d1f6b0ffa0da74a03455df37dda654b

https://preview.redd.it/q0i5urr29cxg1.jpg?width=2048&format=pjpg&auto=webp&s=4d3d946c82edf5fb4324f98fdf9147c88822e425

https://preview.redd.it/nil2j1s29cxg1.jpg?width=2048&format=pjpg&auto=webp&s=ada7ee97f29d4bbe99ff1e1d566a8bda80c9b33c

https://preview.redd.it/f0b0gwr29cxg1.jpg?width=2048&format=pjpg&auto=webp&s=6431aa9ddec5712d957cf74d7dbe3cbea0f63806

https://preview.redd.it/0zopxsr29cxg1.jpg?width=2048&format=pjpg&auto=webp&s=08a76cb76929129b50f58ab79a870865a8d2d0b2

https://preview.redd.it/n92potr29cxg1.jpg?width=2048&format=pjpg&auto=webp&s=5327bb08e6cf960bcc1b597ab5101080ca7e2d26

https://preview.redd.it/ne9b9ur29cxg1.jpg?width=2048&format=pjpg&auto=webp&s=b47a74f4fd75de1e54a9aa32e4d384aab5d5c5b4