How far do you have your Sonos Arc Ultra in front of your TV?
I've set mine to 20 cm in front of the TV, but I'm not sure if it is overkill and could be a bit closer to the TV.
Looking for inspiration, so appreciate anything that is shared.
Didn’t know about the minimum 10 cm between tv and top of Sonos ultra arc, did I damage it? I had it for 2 days playing music and now worried I damaged some of the components inside.
how far in front of the TV is it recommended to place?
I just moved now the controller part is under tv but should I move it forward in the front or what is recommended?
Sonos Arc Ultra, is the base hard enough to make things on the wall vibrating?
Have some old needles with pictures im a bit afraid the arc bass will make the needle loose and fall down.
Is the arc ultra bass strong enough to do that?
The arc ultra is like few cm in front of tv. Would it also cause a loose wall mount to fall off?
23 kvm room without door to hall, would you go for a sub mini or sub 4 paired with a Sonos arc ultra?
Using MacBook Pro 14 inch on the tray on economy class, any problems?
Did anyone experiencing problem when seat in front recline back?
Is there any power outlet?
I’m flying from Istanbul to Ho Chi Minh City
Want to play some games on my MacBook Pro on a 11 hour flight, what game do you recommend?
I got a PS5 controller and touchpad, I am on MacBook Pro m5 pro
Sonos arc ultra for 1000 euro or Sonos Arc for 500 euro?
Want to not spend too much, so wondering if this as standalone is good enough or if it needs to add sub etc.
Saw Samsung has a set too, that I am considering
Sonos arc ultra for 1000 euro or Sonos Arc for 500 euro?
What would you pick? Im trying to decide for one speaker but im not sure if the ultra is worth the higher price compared to the ultra one.
Sonos arc ultra for 1000 euro or Sonos Arc for 500 euro?
What would you pick? Im trying to decide for one speaker but im not sure if the ultra is worth the higher price compared to the ultra one.
Jeg fikk TV-en min montert på veggen i går av en venn som driver litt med oppussingsarbeid og har montert noen TV-er tidligere.
Mens han skrudde fast veggfestet, sa han at overflaten på betongveggen var ujevn. Jeg er ikke helt sikker på hva han mente med det, eller om veggplaten allerede så slik ut i går da han var ferdig. Jeg tror han presset på veggfestet for å sjekke om det satt godt fast, og det virket solid. På det tidspunktet tenkte jeg ikke så mye over det.
TV-en ble montert med Fischer DuoPower 8 × 40-plugger og ST5,5 × 55 mm skruer.
Han hadde også lim inne i de borede hullene sammen med pluggene.
TV-en er en 77-tommers LG OLED. Det er fire skruer i én horisontal rekke.
Jeg kan se en liten glippe mellom veggen og deler av veggfestet. Jeg er usikker på om dette skyldes at veggen er ujevn, om det er normal klaring i festet, eller om veggfestet ikke ligger helt plant inntil veggen.
TV-en føles godt og solid festet, men jeg er bekymret fordi den er stor og tung. Er dette normalt når man monterer på en ujevn betongvegg, eller burde jeg få noen til å hjelpe meg med å ta ned TV-en og kontrollere veggfestet?
Hva ville dere gjort?
I had my TV wall-mounted yesterday by a friend of mine who does some renovation work and has mounted a few TVs before.
While he was screwing it in, he said that the concrete wall surface was irregular/uneven. I am not sure exactly what he meant by that, or whether the wall plate already looked like this yesterday after he finished. I think he pressed on the wall mount to check whether it was holding securely, and it seemed firmly attached. At the time, I did not think much of it.
The TV was mounted using Fischer DuoPower 8 × 40 plugs and ST5.5 × 55 mm screw
He also put glue inside the drilled holes together with the plugs.
The TV is a 77-inch LG OLED. There are four screws in one horizontal row.
I can see a small gap between the wall and part of the wall mount. I am not sure whether this is caused by the wall being uneven, normal clearance in the mount, or whether the mount is not sitting fully flush against the wall.
The TV feels firmly attached, but I am worried because it is large and heavy. Is this normal for an uneven concrete wall, or should I ask someone to help take it down and have the mount inspected?
What would you do?
I had my TV wall-mounted yesterday by a friend of mine who does some renovation work and has mounted a few TVs before.
While he was screwing it in, he said that the concrete wall surface was irregular/uneven. I am not sure exactly what he meant by that, or whether the wall plate already looked like this yesterday after he finished. I think he pressed on the wall mount to check whether it was holding securely, and it seemed firmly attached. At the time, I did not think much of it.
The TV was mounted using Fischer DuoPower 8 × 40 plugs and ST5.5 × 55 mm screws:
https://www.fischernorge.no/nn-no/products/lett-standard-innfesting/nylonplugger/duopower-universalplugg/535455-duopower-8-x-40
He also put glue inside the drilled holes together with the plugs.
The TV is a 77-inch LG OLED. There are four screws in one horizontal row.
I can see a small gap between the wall and part of the wall mount. I am not sure whether this is caused by the wall being uneven, normal clearance in the mount, or whether the mount is not sitting fully flush against the wall.
The TV feels firmly attached, but I am worried because it is large and heavy. Is this normal for an uneven concrete wall, or should I ask someone to help take it down and have the mount inspected?
What would you do?
I had my TV wall-mounted yesterday by a friend of mine who does some renovation work and has mounted a few TVs before.
While he was screwing it in, he said that the concrete wall surface was irregular/uneven. I am not sure exactly what he meant by that, or whether the wall plate already looked like this yesterday after he finished. I think he pressed on the wall mount to check whether it was holding securely, and it seemed firmly attached. At the time, I did not think much of it.
The TV was mounted using Fischer DuoPower 8 × 40 plugs and ST5.5 × 55 mm screws:
https://www.fischernorge.no/nn-no/products/lett-standard-innfesting/nylonplugger/duopower-universalplugg/535455-duopower-8-x-40
He also put glue inside the drilled holes together with the plugs.
The TV is a 77-inch LG OLED. There are four screws in one horizontal row.
I can see a small gap between the wall and part of the wall mount. I am not sure whether this is caused by the wall being uneven, normal clearance in the mount, or whether the mount is not sitting fully flush against the wall.
The TV feels firmly attached, but I am worried because it is large and heavy. Is this normal for an uneven concrete wall, or should I ask someone to help take it down and have the mount inspected?
What would you do?
Here is pictures of the wall mounted tv:
https://imgur.com/a/i3WSG27
I had my TV wall-mounted yesterday by a friend of mine who does some renovation work and has mounted a few TVs before.
While he was screwing it in, he said that the concrete wall surface was irregular/uneven. I am not sure exactly what he meant by that, or whether the wall plate already looked like this yesterday after he finished. I think he pressed on the wall mount to check whether it was holding securely, and it seemed firmly attached. At the time, I did not think much of it.
The TV was mounted using Fischer DuoPower 8 × 40 plugs and ST5.5 × 55 mm screws
He also put glue inside the drilled holes together with the plugs.
The TV is a 77-inch LG OLED. There are four screws in one horizontal row.
I can see a small gap between the wall and part of the wall mount. I am not sure whether this is caused by the wall being uneven, normal clearance in the mount, or whether the mount is not sitting fully flush against the wall.
The TV feels firmly attached, but I am worried because it is large and heavy. Is this normal for an uneven concrete wall, or should I ask someone to help take it down and have the mount inspected?
What would you do?
Where on the wall should I mount the tv based on my sofa?
Where on the wall should I mount the tv based on my sofa?
I’m laying a lot on the sofa on the long side, but I’m wondering what the optimal position is to hang the tv?
Like highlt should be eye height, but what about horizontal compared to the sofa?
Tip on cheap hosting of sPA reactJS?
How much programming work are you able to do per day on a pro license in Claude?
Do you get to do more than on ChatGPT?
macOS Golden Gate vs Tahoe, which do you prefer atm?
How is the beta running for daily use?
Is anyone familiar if these routes has starlink or decent internet for working on Turkish Airlines? How are the planes compared to Emirates?
Oslo to Istanbul and Istandbul to Ho Chi Minh City
Would be glad if you could share your experience with me
14 inch MBP M5 pro or 16 inch MBP M4 Pro for programming and league of legends gaming and WoW?
I’m bringing the machine with me to my parents a few times and works remote sometime from another cøuntry a few times a year. In home i have the Apple Studio display XDR. Sometime using the machine on the couch and bed.
Which machine would you rather get?
I can get a used 16 inch M4 Pro 24 GB for 25 000 NOK and 14 inch m5 Pro 24 GB for 27 000 KR
